Download Catalogue

 

 

 

The  C-Tech process
C-MEM TM system design
1 . The  C-Tech process :
It is a cyclic activated waste water treatment process whereby carbon Belt filter press  np series
For a continuous filtration of municipal, industrial, physical chemistry, biological sludge
Belt filter press np range

IT SERVES TO:
The belt filter press type  NP  is  a  machine  with  double  belt  for  sludge dewatering by gradual pressing  between  two  permeable  belts  crossing each  other  in  a  “S”  way  made  by   rollers  with   decreasing  diameter.

HOW IT WORKS:
The sludge conditioned by  chemical reagents, is discharged to  the  load hopper where there is the first  separation of the water by the gravity kept in the sludge; the  sludge is turned  over on the  other  belt, and  after  the cone zone  it  is  pressed  between  the  two  belts  in  the  pressing  zone

HOW IT IS MADE:
the structure is manufactured by rugged angular section bars 80 × 80 × 8 and  UPN  section  bars,  electric  welded  to  assure  low  coefficients  of deflection and stretching during the tension of the belts. It is manufactured to permit an easy maintenance and inspection. Equipped by  eyebolt  and feet fixing bolts (without necessary particular support). Protection screens installed  on  the  edge  of  the  machine.
Rollers,  tanks,  chutes,  bolts in ox AISI 304

MAIN ADVANTAGES:

Easy to install.  There  is  a  water  basin  to  collect  all  the  waste  water sewage  ( washed  and  screened),  so  it  does  not  need  any  particular supports and water basin; compact dimensions, optimum final dry sludge, low water consumption,  also  with  self - cleaning  spray  nozzles  to  use technical  water,  inverter  to  adjust  the  filtration  speed.

POSSIBILITIES OF USE:
Dewatering of municipal and industrial sludge, slaughterhouses, breading, paper factories, tanneries, food and textile industries, dyeing plant, quarry, marble working.

OPTIONAL UNDER REQUEST:
Electrical panel (the machine is supplied only with the electrical terminal board).
Structure completely manufactured in ox AISI 304.
Self cleaning spray nozzles to use waste water.

Protection panel close type.
CHAIN  VERTICAL
SCREEN BAR TYPE
CP/BRUSH TYPE CS
To install inside a channel
Manufactured in stainless steel AISI 304

    Spacing from 15 to 30 mm or from 0.8 to 5 mm


FILTER WITH COUNTER

FLOW CLEANING

TYPE FPC

    To install inside a channel
    Manufactured in stainless steel AISI 304
    Spacing 3 – 5 - 10 mm


ROTOSTRAINER TYPE R
COME AND GO BRIDGE FOR DEGREASING AND SAND TRAP SYSTEM TYPE PVV

    For rectangular tanks
    Manufactured in hot galvanized Steel or AISI 304
    Full automatic system
    Easy and quick to install

 
    Feeding by pumps
    Manufactured in stainless steel AISI 304
    Spacing from 0.1 to 2.5 mm
    Hight flow rates with compact dimensions

SCRAPING BRIDGE WITH PERIPHERAL TRACTION TYPE PTP FOR PRIMARY SEDIMENTATION

    For circular sedimentation tanks with diameter from 6 mt to 60 mt
    Manufactured in hot galvanized Steel or AISI 304 - 316
    Easy and quick to install
    Hight efficiency

BELT FILTER PRESS TYPE NP

    Flow rates from 2.5 to 19 m3/h
    Manufactured in hot galvanized Steel or AISI 304
    Hight efficienc